Brakes are definitely the most reliable and essential safety device of your vehicle. Basically, they are used to control the speed of a car and are main and only part that is directly responsible for the stopping of your vehicle. Inspecting vehicle brakes at least twice a year for damage and wear, can protect you and other passengers and also save you money on costly repairs. A regular brake inspection is vital for few reasons:
- your safety and the safety of other passengers,
- optimal vehicle performance and
- will save you money on costly repairs.
It’s always better to take your vehicle to a reliable brake service workshop in Melbourne, but sometimes it is important to make some basic checks by yourself.
There are many vehicle models you can inspect the brake system without removing the wheel. If your vehicle has wheel with spaces in the middle, you can get right assessment done by peeping over the hole at the goodies. Whether you peep through the vehicle wheel or need to take the wheel off, ensure you have a great and clear view of the big shiny disk and the brake pads. If you do not have much knowledge about brakes, take your vehicle to a brake service workshop in Melbourne.
The brake disk should be shiny from the inside to the outer edge and is fairly uniform. Do not worry if you can see slight lines in the disk because this type of wear is normal. However, if there are any more serious grooves or rough spots on the brake disk, you should take your vehicle to a brake service Melbourne shop and replace the brake discs. Brake disks should always be changed in pairs so that the safety and performance of your vehicle aren’t compromised. Thus it is best to regularly take your vehicle to a brake service workshop in Melbourne for a full brakes inspection.
Inspect brake pads regularly. Follow the surface of the brake disc to the top to see if the the outside pad is touching the disc. Brake pads are quite cheap and you can even change them yourself. Of course, if you have proper experience and knowledge. If not, do not accept the challenge and have professional brake service Melbourne technician change the brake pads for you. The safety on the road is more important than saving few dollars on the service by performing it yourself.
Finally, take a look at the brake lines. They should be soft, rigid and not cracked. If you note crack in flexible brake lines, then have them changed immediately. Also, make sure you inspect the metal, hard lines, because they can corrode, especially in the areas that are snowy and where different chemical products are used to clear roads. However, regardless of the fact that you can inspect the brakes yourself, it is best to take the car to a reputable brake service Melbourne shop.
